No incentive programs are available at this time for the following green measures: Water Conservation Indoor,Water Conservation Outdoor.

No incentive programs are available at this time.

No incentive programs are available at this time.

Application period

1/1/2022 - 12/31/2022

1. Applications are currently closed.

2. Preferred Vendor/Contractor required: No

3. Pre-Approval Required: No

4. Pre-Inspection Required: No

5. Post-Audit Required: No

6. Average time from Application to Approval: No incentive programs are available at this time.

7. After approval, funds typically received: No incentive programs are available at this time.

No incentive programs are available at this time.

None

The Appliance Incentives for Business Program is offered to Maryland commercial, industrial, governmental and institutional customers of Potomac Edison to encourage participants to install high-efficiency equipment.

Only new equipment is eligible for incentives under the Appliance Incentives for Business Program.

Incentives may be available for the following equipment:

• Vending machine controls
• Clothes washers
• Refrigerators
• ENERGY STAR® certified room air conditioners
• ENERGY STAR certified vending machines
• ENERGY STAR certified heat pump water heaters

Equipment and Eligibility Requirements

• Pre-Rinse Sprayers
  Replacement of existing sprayer with new unit that use 1.6 GPM or less, on/off squeeze lever, and cleaning of performance of at least 26 seconds. Electric water heating only.
• ENERGY STAR Dehumidifiers
  Purchase and installation of a new dehumidifier meeting ENERGY STAR V5.0
• ENERGY STAR Water Coolers
  Purchase and installation of an ENERGY STAR V2.0 water cooler.
• Heat Pump Water Heaters
  Purchase and installation of a Heat Pump domestic water heater in place of a standard electric water heater, EF>2.0.
• Non-Commercial Duty Clothes Washers - CEE Tier 2
  Purchase and installation of a clothes washer meeting ENERGY STAR most efficient or CEE Tier 2.
• Non-Commercial Duty Clothes Washer – CEE Tier 3
  Purchase and installation of a clothes washer meeting CEE Tier 3.
• Commercial Clothes Washers - CEE Tier 1
  Purchase and installation of a clothes washer meeting ENERGY STAR Most Efficient of CEE Tier 1.
• Commercial Clothes Washers - CEE Tier 2
  Purchase and installation meeting or exceeding CEE Tier 2
• Non-Commercial Duty Clothes Dryers (w/ Moisture Sensor)
  Purchase and installation of an ENERGY STAR rated clothes dryer with moisture sensor or a heat pump type clothes dryer
• Non-Commercial Duty Refrigerators Tier 2
  Purchase and installation of a new refrigerator meeting either ENERGY STAR or CEE Tier 2.
• Non-Commercial Duty Refrigerators Tier 3
  Purchase and installation of a new refrigerator meeting CEE Tier 3
• Non-Commercial Duty ENERGY STAR Freezers**
  Purchase and installation of a new ENERGY STAR rated freezer.

All Appliance Incentives for Business Program applications received by the Program Administrator require pre-approval before the installation of equipment.

Varies by project

• Pre-Rinse Sprayers || $50 Per Unit
• ENERGY STAR Dehumidifiers || $25 Per Unit
• ENERGY STAR Water Coolers || $50 Per Unit
• Heat Pump Water Heaters || $1,000 Per Unit
• Non-Commercial Duty Clothes Washers || $100 Per Unit
• Non-Commercial Duty Clothes Dryers (w/ Moisture Sensor) || $50 Per Unit
• Non-Commercial Duty Refrigerators || $100 Per Unit
• Non-Commercial Duty ENERGY STAR Freezers || $50 Per Unit

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: Program Ally

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: Yes

5. Post-Audit Required: Yes

6. Average time from Application to Approval: Assumes the project timeline. Varies depending on scope of the project.

7. After approval, funds typically received: Payment typically received within 4-6 weeks.

NOTE: Make sure you are in the Potomac Edison (TDU) service territory.

1. he participant should complete and submit an Appliances program application online and upload required documents through the application portal. The following documents are required for a pre-approval:
   > Manufacturers’ specification (cut) sheets for the proposed equipment. Please highlight all relevant information such as the equipment efficiency ratings.
   > W-9 tax form for the incentive payee
   > Copy of utility bill to con?rm account number and service address. If desired, the participant may obscure all cost- and rate-related information.

2. The Program Administrator will notify the applicant via email when the review is complete and funds have been reserved. Upon receipt of Program pre-approval email, participants may purchase and install their energy-efficient equipment.

3. Once the project is complete, the participant should review the approved application for any changes to the project that occurred during installation and make any needed corrections. The following final documentation should be submitted to the Program Administrator for review:
   > Detailed, itemized invoices or proofs of purchase for the equipment installed
   > Manufacturers’ specification (cut) sheets for any additional equipment installed
   > Completed letter of attestation\

4. Upon receipt and verification of all required documentation, the incentive check will be processed and mailed to the applicant or to an authorized representative, if requested on the application.
   Apply onlineor contact us at 855-801-5803 for assistance.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the rebate administrator to maximize the cash rebates your project is approved for. IncentiFind assesses a fee of 30% on successfully acquired rebates. We only get paid if you get paid. There's no hourly rate, no deposit, and we're structured to accompany your project through the inevitable changes. The sooner we start, the more likely we can capture rebates on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

Eligible CHP projects must meet the following requirements:

• Generators will be driven by turbines or internal combustion engines coupled to generators, where waste heat is used to support the customer’s process.
• The thermal output must be used within the customer’s process and/or building systems. The design of the system shall take into consideration the application of a technology (e.g. absorption chillers) that will use the thermal output to further reduce the customer’s electric load.
• CHP design must achieve at least 65 percent operating efficiency (relationship of useful electric and thermal output verses the fuel input). The customer must install the required metering (kWh, MMBTU/hr, fuel consumption/hr) to support the measurement and verification process for the project (i.e., to assess electric energy output and annual performance).
• The preferred fuel source is natural gas or biogas.
• All CHP electricity generated is intended solely for on-site use by the customer.
• Incentives are not available to CHP systems that serve off-site customers, export to the grid, or are not located on the customers property.
• All installations must be determined to be cost effective, with a score greater than 1.0 using the Total Resource Cost (TRC) test. Contact Potomac Edison for TRC assistance.
• The design of the system shall be such that the generation equipment is controlled to meet the on-site energy requirements, thus providing no continuous or incidental electrical energy export. The recommended design would be that the CHP system is designed to not exceed approximately 80% of the facility’s electrical energy usage requirements.
• Generator size will be limited to 10 megawatts (MW) per location and application, and subject to Potomac Edison retail tariff(s), including interconnection and net metering requirements.

Pre-Approval Requirements

• All Combined Heat and Power Incentives applications received by Potomac Edison require pre-approval before the purchase and installation of equipment. The Program Administrator will issue a formal pre-approval letter for all projects within a reasonable time period upon receipt of all required program forms and documentation.

To qualify for Combined Heat and Power Incentives, all projects must be pre- approved by December 31, 2023.

Varies by project

Incentives are offered as follows:

• 50 kW or less: $2,000/kW
• 51 kW to 200 kW: $1,600/kW
• 201 kW to 1000 kW: $1,200/kW
• Larger than 1000 kW: $800/kW

Three Payment Structure

• Design Incentive: 10% incentive at project approval
• Commissioning Incentive: 30% incentive at installation and commissioning
• Production Incentive: Remaining incentive (up to 60%) will be paid after receiving 12 consecutive months of actual kWh generation within 24 months of project commissioning. Payment will be based on the following ratio: kWh actual generation/kWh proposed generation; Payment will be capped at 60% of total incentive. Incentives are capped at $2.5 million per customer and limited to one project per customer per plan cycle.

Application period

1/1/2023 - 12/31/2023

1. Application period is open (The deadlines to qualify for the commissioning (final construction) incentives are through December 31, 2025 and production incentives through December 31, 2027.)

2. Preferred Vendor/Contractor required: No preferred vendor/contractor

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: No

5. Post-Audit Required: No

6. Average time from Application to Approval: Assumes the project timeline. Varies depending on scope of the project.

7. After approval, funds typically received: Please allow up to 90 days to receive incentive payment.

NOTE: Make sure you are in the Potomac Edison (TDU) service territory.

1. The participant should complete and submit a Combined Heat and Power Incentive application online and upload required documents through the application portal. The following documents are required for pre-approval:
   » Completed and signed W-9 tax form for the incentive payee. The W-9 form must be current and dated within the last 24 months.
   » Copy of utility bill to con?rm account number and service address. If desired, the participant may obscure all cost- and rate-related information.
   » Executive summary including project scope and intended use for heat output
   » Pre- and post-installation equipment specifications and operating assumptions, including replaced heating equipment as well as proposed backup boiler and fuel conditioning equipment
   » All energy calculations associated with the project, including hourly heat and electric load analysis for facility
   » Manufacturer’s specification cut sheets to verify size, technology and efficiency levels of proposed/installed equipment including generator, engine and backup heating/fuel conditioning
   » Provide Potomac Edison with required information/documentation, refer to FirstEnergy CHP Project Data Form. Potomac Edison will evaluate project based on a Total Resource Cost Test (TRC) calculator and review of proposed design efficiency.
   » Please include a checklist of the following key information provided, along with location address (e.g., file name or page):
   a. Executive summary detailing general description of the total project.
   b. Facility hourly load analysis.
   c. Calculation of annual proposed, gross generation (kWh).
   d. Calculation of annual auxiliary equipment usage such as fans, pumps, compressors, and backup systems (kWh).
   e. Calculation of annual generation to be used on site (kWh).
   f. Estimated Peak kW offset at the facility (Peak kW savings are defined as the facility load offset in the hour ending 5 p.m. on the hottest summer weekday).
   g. Manufacturer’s specification cut sheets.
   h. FirstEnergy CHP Project Data Form.

2. The Program Administrator will notify the applicant via email when the application review is complete and Project is pre-approved.

3. The applicant will then be required to provide a signed letter of intent and an acknowledgement of Potomac Edison’s Terms and Conditions for CHP projects, forms provided by Potomac Edison. Upon receipt of the signed documents, the design incentive will be disbursed to the customer.

4. During construction and prior to commissioning of the CHP project, a pre-inspection will be conducted.

5. Participants should review their pre-approved project for any changes and submit the following documents to the Program Administrator for review:
   » Revised engineering and related energy savings analysis/calculations (if changes were made during construction)
   » Detailed, itemized invoices or proofs of purchase for the equipment installed
   » Completed letter of attestation on customer letterhead, signed by the customer

6. After CHP project is commissioned:
   Within 24 months of project commissioning, provide 12 consecutive months of metered data (kWh, MMBTU/hr, fuel consumption/hr) of the CHP system to verify the energy efficiency performance of the new CHP system. Supporting technical documentation will be reviewed by the Program Administrator, and an on-site inspection to verify the installation may be conducted. Upon receipt and verification of all required documentation, the incentive check will be processed and mailed to the applicant or to an authorized representative, if requested on the application. Apply online or contact us at 855-801-5803 for assistance.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the rebate administrator to maximize the cash rebates your project is approved for. IncentiFind assesses a fee of 30% on successfully acquired rebates. We only get paid if you get paid. There's no hourly rate, no deposit, and we're structured to accompany your project through the inevitable changes. The sooner we start, the more likely we can capture rebates on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

The Commercial New Construction Program is available for most project types including commercial, institutional, industrial, and multifamily. To qualify, participating projects should be:

• In Potomac Edison’s service territory
• New construction, an addition, or a major renovation with a mechanical and lighting systems replacement
• Larger than 5,000 square feet

Varies by Project

Complimentary Energy Design Assistance
Customized energy model that simulates energy use to identify strategies with the greatest impact and cost-effectiveness.

Design Team Incentive
We offer a design team participation incentive to offset design team time associated with program participation.

Construction Incentive
For the building owner, based on the annual electric savings, and to help lower costs of implementing strategies.

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: Willdan

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: Yes

5. Post-Audit Required: Yes

6. Average time from Application to Approval: Varies by project. Please work with a program team member to ensure a streamlined process.

7. After approval, funds typically received: Varies depending on your project's (building's) performance after improvements / upgrades are completed and measured. Funds will reflect your project's (building's) performance.

NOTE: Make sure you are in the Potomac Edison (Retail Energy Provider) service territory.

1. Enroll
   Provide your building's basic info in our application.

2. Preliminary Analysis
   Real-time evaluation of energy-efficiency improvements bundled with whole-building strategies.

3. Final Analysis
   Pick the best fit for your goals, and we'll analyze energy savings and eligible incentives.

4. Verify
   We'll confirm your project was built to plan and issue a verification report.

5. Earn
   Utility incentives are provided for the completed project.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the incentive administrator to maximize the funds your project is approved for. IncentiFind assesses an hourly rate fee for this incentive. Our rate range is $150-$450 per hour. The application process can range anywhere from 6-8 hours. IncentiFind will provide a quote for your approval for this incentive application. The sooner we start, the more likely we can capture this incentive on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

Eligibility

To qualify for an incentive, HVAC equipment must:

• Be used for ambient cooling only
• Meet or exceed the minimum efficiency rating required for the equipment type and cooling capacity
• Be installed in a facility owned by a commercial or industrial retail customer of Potomac Edison
• Meet additional technical requirements outlined in the application

Flat-rate per-unit or per-ton capacity incentives are available for:

• Air conditioners
• Chillers
• Other HVAC equipment
• Heat pumps
• PTAC/PTHP
• VFDs Pre-Approval

To qualify for incentives through the HVAC Incentives for Business Program, equipment must have been purchased and installed after January 1, 2021, and after receipt of a formal pre-approval letter from the Program Administrator.

The HVAC Incentives for Business Program is offered to Maryland commercial, industrial, governmental and institutional customers of Potomac Edison to encourage participants to install high-efficiency heating and air conditioning equipment.

Varies by Project.

• Retrofit project incentives are capped at the calculated project incentive or up to 50 percent of the total project costs (including labor).

Air Conditioners
> Air Cooled, split and package units = $250 Per Ton
> Water-cooled = $250 Per Ton
> Evaporatively Cooled = $250 Per Ton

Heat Pumps – Air Source
> Air Source = $250 Per Ton

Heat Pumps –Water and Ground Source
> Water Source = $250 Per Ton
> Ground Source || Ground Water Source = Tier 1: $300 || Tier 2: $350 Per Ton

Ductless, Mini Split Heat Pumps
> Ductless, Mini Split Heat Pumps = $150 Per Ton

Packaged Terminal Air Conditioners (PTAC)
> New Construction (Standard size) = $75 - $125 Per Unit
> Replacements (Non-Standard Size) = $75 - $125 Per Unit

Packaged Terminal Heat Pump (PTHP)
> New Construction (Standard size) = $75 - $125 Per Unit
> Replacements (Non-Standard Size) = $75 - $125 Per Unit

Chillers
> Air Cooled Chillers, Water Cooled, Electrically Operated, Positive Displacement, Water Cooled, Electrically Operated, Centrifugal = Base: $30 per Ton , Performance: $10 per Ton for each 0.1 EER point above or for each 0.01 kW below minimum efficiency Full Load or Integrated Part Load Value (IPLV)

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: No preferred vendor/contractor

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: No

5. Post-Audit Required: No

6. Average time from Application to Approval: Varies by project. Please work with a program team member to ensure a streamlined process.

7. After approval, funds typically received: Please allow up to 90 days to receive incentive payment.

NOTE: Make sure you are in the Potomac Edison (Retail Energy Provider) service territory.

1. The participant should complete and submit a Program application online and upload required documents through the application portal. The following documents are required for a pre-approval:
   > Manufacturers’ specification (cut) sheets for the proposed equipment. Please highlight all relevant information such as the equipment efficiency ratings, model, and wattage.
   > W-9 tax form for the incentive payee
   Must be dated within 2 years of application submission date
   Must have an original signature; electronic signatures are not accepted in this program
   > Copy of utility bill to con?rm account number and service address. If desired, the participant may obscure all cost and rate-related information.
   Must show a breakout of equipment and labor costs
   Must be signed by customer
   Must have description of equipment, proposed quantity, and unit price

2. The Program Administrator will notify the applicant via email when the review is complete and funds have been reserved. Upon receipt of Program pre-approval email, participants may purchase and install their energy-efficient.

3. Once the project is complete, the participant should review the approved application for any changes to the project that occurred during installation and make any needed corrections. The following final documentation should be submitted to the Program Administrator for review:
   > Detailed, itemized invoices or proofs of purchase for the equipment installed
   > Manufacturers’ specification (cut) sheets for any additional equipment installed (if applicable)
   > Completed letter of attestation.

4. Upon receipt and verification of all required documentation, the incentive check will be processed and mailed to the applicant or to an authorized representative, if requested on the application.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the rebate administrator to maximize the cash rebates your project is approved for. IncentiFind assesses a fee of 30% on successfully acquired rebates. We only get paid if you get paid. There's no hourly rate, no deposit, and we're structured to accompany your project through the inevitable changes. The sooner we start, the more likely we can capture rebates on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

Eligible Scope:

Available to existing facilities and new construction projects, the Lighting Incentives for Business Program is offered to Maryland commercial, industrial, governmental and institutional customers of Potomac Edison to encourage participants to install high-efficiency lighting equipment.

Eligible Measure:

• LED fixtures
• LED lamps/bulbs
• LED exit signs
• Occupancy and lighting controls

All Type B LED Lamps are not eligible for incentives under this program. Type B LEDs are lamps where the wiring from the existing ballast is terminated, the sockets are rewired from the branch circuit, and the LED operates from line voltage supplied directly to the fixture; the LED has an internal driver.

Pre-Approval Requirements

• All Lighting Incentives for Business Program applications received by the program will require pre-approval before the purchase and installation of materials.

To qualify for incentives through the Lighting Incentives for Business Program, equipment must have been purchased and installed after January 1, 2021, and after the receipt of a formal pre-approval letter from the Program Administrator.

Varies by Equipment.

• New LED linear recessed troffer for 2x2 and 1x4 luminaires = $75 Per Fixture
• New LED linear recessed troffer for 2x4 luminaires = $100 Per Fixture
• New LED flat panel for 2x2 and 1x4 luminaires = $50 Per Panel
• New LED flat panel for 2x4 luminaires = $50 Per Panel
• New LED linear ambient luminaire with direct and indirect components or Vapor Tight, min. IP65 = $30 Per Foot
• New LED linear ambient luminaire = $30 Per Foot
• New LED stairwell luminaire = $100 Per Fixture
• New LED wall wash luminaire = $30 Per Foot
• New LED track/mono-point luminaire = $40 Per Head
• New LED display case luminaire = $40 Per Fixture
• New LED display case luminaire installed in reach- in coolers/freezers = $50 Per Fixture
• New LED high/low bay luminaire - DLC reported lumens between 5,000 lm - 9,999 lm = $200 Per Fixture
• New LED high/low bay luminaire - DLC reported lumens between 10,000 lm - 19,999 lm = $300 Per Fixture
• New LED high/low bay luminaire - DLC reported lumens between 20,000 lm - 29,999 lm = $400 Per Fixture
• New LED high/low bay luminaire - DLC reported lumens between 30,000 lm - 39,999 lm = $500 Per Fixture
• New LED high/low bay luminaire - DLC reported lumens 40,000 lm or more = $600 Per Fixture
• New LED exterior luminaire - DLC reported lumens 4,999 lm or less = $150 Per Fixture
• New LED exterior luminaire - DLC reported lumens between 5,000 lm - 9,999 lm = $250 Per Fixture
• New LED exterior luminaire - DLC reported lumens between 10,000 lm - 19,999 lm = $300 Per Fixture
• New LED exterior luminaire - DLC reported lumens between 20,000 lm - 29,999 lm = $400 Per Fixture
• New LED exterior luminaire - DLC reported lumens between 30,000 lm - 39,999 lm = $500 Per Fixture
• New LED exterior luminaire - DLC reported lumens 40,000 lm or more = $600 Per Fixture
• LED linear retrofit kit for 2x2 and 1x4 fixtures = $25 Per Fixture
• LED linear retrofit kit for 2x4 fixtures = $45 Per Fixture
• LED integrated retrofit kit for 2x2 and 1x4 fixtures = $75 Per Fixture
• LED integrated retrofit kit for 2x4 fixtures = $110 Per Fixture
• LED integrated flat panel retrofit kit for 2x2 and 1x4 fixtures = $20 Per Panel Kit
• LED integrated flat panel retrofit kit for 2x4 fixtures = $40 Per Panel Kit
• LED retrofit kit for linear ambient luminaire = $15 Per Foot
• LED retrofit kit for high/low bay luminaire = $100 Per Fixture
• LED retrofit kit for exterior luminaire = $100 Per Fixture
• New LED ENERGY STAR fixture - 1,499 lm or less = $30 Per Fixture
• New LED ENERGY STAR fixture - 1,500 lm - 2,999 lm = $50 Per Fixture
• New LED ENERGY STAR LED fixture - 3,000 lm or greater = $100 Per Fixture
• LED linear replacement lamp with new LED driver = $10.80 Per Lamp
• LED mogul-screw base replacement for HID lamps and new external driver = $80 Per Lamp
• LED linear replacement lamp using internal driver (Type-A) = $6.80 Per Lamp
• LED pin-base replacement lamp for CFL = $8.50 Per Lamp
• LED A lamp = $4.00 Per Lamp
• LED Decorative or Globe lamp = $5.00 Per Lamp
• LED MR lamp = $5.00 Per Lamp
• LED PAR lamp $5 per lamp - PAR20; = $10 per lamp - PAR30 & PAR38 Per Lamp
• Exterior/Dusk-to-Dawn application = $2 Per Watt Reduced
• Interior application = $2 Per Watt Reduced
• 24-hour operation = $2 Per Watt Reduced
• Networked lighting control system controlling efficient luminaires = $0.60 Per Watt Control
• Networked lighting control w/local or cloud server required = $60 Per Fixture
• Networked lighting control - w/local or cloud server required - lower wattage fixtures/downlights = $30 Per Fixture
• Networked lighting control no server required = $50 Per Fixture
• Networked lighting control no server required - lower wattage fixtures/downlights = $10 Per Fixture
• Occupancy Controls $20 - $50
• Exit Signs = $23 Per Unit
• Linear Fluorescent HE T8 = $15 Per Fixture
• Street & Area Lighting (Customer owned) = $200 Unit
• LED Illuminated Signage (Backlit/Flat Screen/Wet Erase) = $10 Per SF. of Screen
• LED Traffic Signals = $35 Lamp
• Lighting - Other = $0.05 per kWh saved Per kWh
• Lighting – Custom = $0.05 per kWh saved Per kWh

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: No preferred vendor/contractor

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: No

5. Post-Audit Required: No

6. Average time from Application to Approval: Assumes the project timeline. Varies depending on scope of the project.

7. After approval, funds typically received: Please allow up to 90 days to receive incentive payment.

NOTE: Make sure you are in the Potomac Edison (TDU) service territory.

1. The participant should complete and submit a Lighting Program application online and upload required documents through the application portal. The following documents are required for a pre-approval:
   > Potomac Edison lighting calculator spreadsheet. (This requirement is waived for projects involving only the installation of LED channel letter signage.)
   > Manufacturers’ specification (cut) sheets for the proposed equipment. Please highlight all relevant information such as the equipment efficiency ratings.
   > Letter attesting to the facility hours of operation (if applicable)
   > W-9 tax form for the incentive payee
   > Copy of utility bill to con?rm account number and service address. If desired, the participant may obscure all cost and rate-related information.

2. The Program Administrator will notify the applicant via email when the review is complete and funds have been reserved. Upon receipt of a Program pre-approval email, participants may purchase and install their energy-efficient equipment.

3. Once the project is complete, the participant should review the approved application for any changes to the project that occurred during installation and make any needed corrections. The following final documentation should be submitted to the Program Administrator for review:
   > Detailed, itemized invoices or proofs of purchase for the equipment installed
   > Manufacturers’ specification (cut) sheets for any additional equipment installed (if applicable).
   > Revised Potomac Edison lighting calculator spreadsheet. (This requirement is waived if no changes were made during construction.)
   > Completed letter of attestation

4. Upon receipt and verification of all required documentation, the incentive check will be processed and mailed to the applicant or to an authorized representative, if requested on the application. Apply online or contact us at 855-801-5803 for assistance.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the rebate administrator to maximize the cash rebates your project is approved for. IncentiFind assesses a fee of 30% on successfully acquired rebates. We only get paid if you get paid. There's no hourly rate, no deposit, and we're structured to accompany your project through the inevitable changes. The sooner we start, the more likely we can capture rebates on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

Eligibility

• To qualify for incentives through the Consumer Electronics Incentives for Business Program, equipment must have been purchased and installed after January 1, 2021, and after receipt of a formal pre-approval letter from the Program Administrator.

Eligible Measures and Incentives

Incentives may be available for the following equipment:

• ENERGY STAR® certified monitors, computers and imaging
• Small network software (network power management enabler)
• Uninterruptible power supplies (UPS)

Pre-approval Requirements

• All Consumer Electronics Incentives for Business Program applications received by the Program Administrator require pre-approval before the installation of equipment.

Varies by Equipment.

• Advanced Power Strips Tier 1&2 = $20 Per Unit
• Monitors = $5 Per Unit
• Computers = $5 Per Unit
• Uninterruptible Power Supply (UPS) = $40 Per kVA
• Imaging = $10 Per Unit
• Small Network PC Controller = $15 Per PC Controlled

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: Program Ally

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: No

5. Post-Audit Required: No

6. Average time from Application to Approval: Assumes the project timeline. Varies depending on scope of the project.

7. After approval, funds typically received: Please allow up to 90 days to receive incentive payment.

NOTE: Make sure you are in the Potomac Edison (TDU) service territory.

1. The participant should complete and submit a Consumer Electronics program application online and upload required documents through the application portal. The following documents are required for a pre-approval:
   > Manufacturers’ specification (cut) sheets for the proposed equipment. Please highlight all relevant information such as the equipment efficiency ratings.
   > W-9 tax form for the incentive payee > Copy of utility bill to con?rm account number and service address. If desired, the participant may obscure all cost- and rate-related information.

2. The Program Administrator will notify the applicant via email when the review is complete and funds have been reserved. Upon receipt of Program pre-approval email, participants may purchase and install their energy-efficient equipment.

3. Once the project is complete, the participant should review the approved application for any changes to the project that occurred during installation and make any needed corrections. The following final documentation should be submitted to the Program Administrator for review:
   > Detailed, itemized invoices or proofs of purchase for the equipment installed
   > Manufacturers’ specification (cut) sheets for any additional equipment installed
   > Completed letter of attestation.

4. Upon receipt and verification of all required documentation, the incentive check will be processed and mailed to the applicant or to an authorized representative, if requested on the application.

Apply online or contact us at 855-801-5803 for assistance.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the rebate administrator to maximize the cash rebates your project is approved for. IncentiFind assesses a fee of 30% on successfully acquired rebates. We only get paid if you get paid. There's no hourly rate, no deposit, and we're structured to accompany your project through the inevitable changes. The sooner we start, the more likely we can capture rebates on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

The Food Service and Commercial Kitchens Incentives for Business Program is offered to Maryland commercial, industrial, governmental and institutional customers of Potomac Edison to encourage participants to install high-efficiency equipment.

Typical participants in the Food Service and Commercial Kitchens Incentives for Business Program include grocery, convenience stores and restaurants, as well as schools, hospitals and lodging facilities that include food service equipment.

To qualify for incentives through this program, equipment must have been purchased and installed after January 1, 2021, and after receipt of a formal pre-approval letter from the Program Administrator.

Eligible Measures and Incentives

• ENERGY STAR® certified solid and glass door reach-in refrigerators and freezers, ice machines, electric steam cookers, hot food-holding cabinets, combination and convection ovens, beverage vending machines and fat fryers
• Anti-sweat heat controls
• Night covers
• Strip curtains
• Vending machine controls
• Pre-rinse sprayers
• Strip curtains
• Refrigerated case covers
• Reach-in freezer/refrigerator LED lighting
• Occupancy controls for reach-in freezer/refrigerator lighting

Pre-Approval Requirements
All Food Service and Commercial Kitchens Incentives for Business Program applications received by the Program Administrator require pre-approval before the installation of equipment.

Varies by Project

Equipment Description || Incentive || Unit

Refrigeration Measures

• Anti-Sweat Heat Control || $50 || Per Door
• ECM Evaporator Fan Motor || $75 || Per Unit
• Evaporator/Compressor Controller || $1,000 || Per Cooler
• Evaporator Fan Controller || $100 || Per Unit
• Night Covers - Open Reach-In Coolers || $8 || Per Linear ft, up to $500
• Strip Curtains for Walk-In Coolers and Freezers || $5 || Per Sq. Ft.

Commercial Dishwashers

• High Temperature Under Counter || $300 || Per Unit
• High Temperature Door Type || $500 || Per Unit
• High Temperature Single Tank Conveyor || $700 || Per Unit
• Low Temperature Under Counter || $75 || Per Unit
• Low Temperature Door Type || $400 || Per Unit
• Low Temperature Single Tank Conveyor || $400 || Per Unit
• Low Temperature Multi Tank Conveyor || $600 || Per Unit

Fat Fryers

• Open Deep Fat Fryers || $250 || Per Unit
• Large Vat Fryers || $250 || Per Unit
• Griddles || $300 || Per Unit

Insulated Holding Cabinets

• Full-Size Cabinets || $400 || Per Unit
• Three-Quarter Size Cabinets || $300 || Per Unit
• Half-Size Cabinets || $250 || Per Unit

Ice Machine

• CEE Tier I < 450 lbs. per 24 hrs. || $75 || Per Unit
• CEE Tier I 450-1,000 lbs. per 24 hrs. || $150 || Per Unit
• CEE Tier I > 1,000 lbs. per 24 hrs. || $200 Per Unit
• CEE Tier II Cube & Nugget ( < 450 lbs. per 24hrs.) || $100 || Per Unit
• CEE Tier II Cube & Nugget (450-1,000 lbs. per 24 hrs.) || $150 || Per Unit
• CEE Tier II Cube & Nugget ( > 1,000 lbs. per 24 hrs.) || $200 || Per Unit
• CEE Tier II Flake ( < 450 lbs. per 24 hrs.) || $150 || Per Unit
• CEE Tier II Flake (450-1,000 lbs. per 24 hrs.) || $250 || Per Unit
• CEE Tier II Flake ( > 1,000 lbs. per 24 hrs.) || $300 || Per Unit

Ovens

• Convection Ovens || $400 || Per Unit
• Combination Ovens || $1,200 || Per Unit

Solid Door Reach-In

• Refrigerators < 19 cubic ft. || $100 || Per Unit
• Refrigerators 19-20 cubic ft. || $100 || Per Unit
• Refrigerators 21-60 cubic ft. || $150 || Per Unit
• Refrigerators 61-90 cubic ft. || $225 || Per Unit
• Freezers < 19 cubic ft. || $100 || Per Unit
• Freezers 19-20 cubic ft. || $200 || Per Unit
• Freezers 21-60 cubic ft. || $350 || Per Unit
• Freezers 61-90 cubic ft. || $500 || Per Unit

Glass Door Reach-In

• Refrigerators < 19 cubic ft. || $75 || Per Unit
• Refrigerators 19-20 cubic ft. || $100 || Per Unit
• Refrigerators 21-60 cubic ft. || $125 || Per Unit
• Refrigerators 61-90 cubic ft. || $150 || Per Unit
• Freezers < 19 cubic ft. || $100 || Per Unit
• Freezers 19-20 cubic ft. || $200 || Per Unit
• Freezers 21-60 cubic ft. || $250 || Per Unit
• Freezers 61-90 cubic ft. || $300 || Per Unit

Steam Cookers

• Steam Cookers || $125 || Per Pan

Beverage Vending Machine

• Beverage Vending Machine || $75 || Per Unit

Vending Machine Controls

• Non-Refrigerated || $50 || Per Unit
• Refrigerated || $100 || Per Unit

Induction Warmer/Rethermalizer Well

• Induction Warmer/Rethermalizer Well || $200 || Per Unit

Coffee Brewers

• Coffee Brewers || $100 || Per Unit

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: No preferred vendor/contractor

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: No

5. Post-Audit Required: Yes

6. Average time from Application to Approval: Varies by project. Please work with a program team member to ensure a streamlined process.

7. After approval, funds typically received: Payment typically received within 4-6 weeks.

NOTE: Make sure you are in the Food Service and Commercial Kitchens Incentives for Business Program (TDU) service territory.

1. The participant should complete and submit a program application online and upload required documents through the application portal. The following documents are required for a pre-approval:
   > Manufacturers’ specification (cut) sheets for the proposed equipment. Please highlight all relevant information such as the equipment efficiency ratings.
   > W-9 tax form for the incentive payee
   > Copy of utility bill to con?rm account number and service address. If desired, the participant may obscure all cost and rate related information.

2. The Program Administrator will notify the applicant via email when the review is complete and funds have been reserved. Upon receipt of Program pre-approval email, participants may purchase and install their energy-efficient equipment.

3. Once the project is complete, the participant should review the approved application for any changes to the project that occurred during installation and make any needed corrections. The following final documentation should be submitted to the Program Administrator for review:
   > Detailed, itemized invoices or proofs of purchase for the equipment installed
   > Manufacturers’ specification (cut) sheets for any additional equipment installed
   > Completed letter of attestation

4. Upon receipt and verification of all required documentation, the incentive check will be processed and mailed to the applicant or to an authorized representative, if requested on the application.

Don't have time to fill out paperwork? Let our APPLY Services Team do it for you! Once you provide access to appropriate documentation, your assigned APPLY Services Team Member will work with the rebate administrator to maximize the cash rebates your project is approved for. IncentiFind assesses a fee of 30% on successfully acquired rebates. We only get paid if you get paid. There's no hourly rate, no deposit, and we're structured to accompany your project through the inevitable changes. The sooner we start, the more likely we can capture rebates on your behalf. Funding runs out and deadlines pass, so simply click "Help Me Apply" and follow the prompts to authorize your project for our APPLY Services.

Eligible Measures and Incentives

Instant Lighting Discounts are available for:

• LED Type A-lamps
• LED Specialty lamps, Type MR, BR, PAR, R, decorative and globe
• LED High and Low Bay Fixtures
• E39 mogul base lamps
• LED Linear fixtures and retrofit kits
• LED Linear tubes, Type A LEDs
• LED Exterior wall pack and floods

Lighting products must be listed on DLC 4.3 or ENERGY STAR® 2.1.

Instant HVAC Discounts are available for:

• Air Source Air Conditioners and Heat Pumps
• Ductless Mini-Splits
• Packaged Terminal Air Conditioners (PTAC)
• Packaged Terminal Heat Pumps (PTHP)

Pre-Approval Requirements

• Pre-approval must be submitted and approved before completing the sale for all lighting projects that exceed $1,800 in incentive funds.
• Pre-approval is not required for HVAC equipment.

Varies by Equipment.

LED Reflector/Globe

• BR30 $5 Per Unit
• MR16, MRx16 = $5 Per Unit
• PAR16 = $6 Per Unit
• PAR20, PAR30 = $5,$8 Per Unit
• PAR38 = $8 Per Unit
• R20, R30, R40 = $5,$5,$6 Per Unit
• Globe = $5 Per Unit
• LED Downlight Retrofit Kit = $15 Per Unit

LED A-Line

• A-Line = 1,600 Lumens = $4 Per Unit
• A-Line > 1,600 Lumens = $6 Per Unit

LED High/Low Bays

• 150W Replacement: 3,950 - 11,250 Lumens = $30 Per Unit
• 250W Replacement: 11,251 - 20,350 Lumens = $50 Per Unit
• 400W Replacement: 20,351 - 58,050 Lumens = $80 Per Unit *Type A, E39 Mogul Base Products: LED 100W/150W Replacement: 3,950 - 15,750 Lumens = $30 Per Unit
• Type A, E39 Mogul Base Products: LED 250W/400W Replacement: 15,751 - 58,050 Lumens = $50 Per Unit

Fixtures and Kits

• 2 ft. 1,500 - 5,500 Lumens = $15 Per Unit
• 4 ft. Up to 9,400 Lumens = $30 Per Unit

Pin-Based CFL Replacements

• CFLED, 2 and 4 Pin, Vertical and Horizontal, Biax and 2G11 Base, All Lumens = $6 Per Unit

Linear

• LED Lamps 2-8 ft. All Lumen Ranges = $4 - $10 Per Unit

LED Exterior Wall Packs, Floods and Area Lights

• Replacement for <= 100W- Exterior Luminaire 4,999 lm or less = $25 Per Unit
• Replacement for >100/<150W - Exterior Luminaire 5,000 – 9,999 lm = $38 Per Unit
• Replacement for >150/< 250W - Exterior Luminaire 10,000 – 19,999 lm = $50 Per Unit
• Replacement for >250W/<400W - Exterior Luminaire 20,000 – 29,999 lm = $75 Per Unit
• Replacement for 400W- Exterior Luminaire 30,000 – 39,999 lm = $88 Per Unit
• Replacement for > 400W/<=1000W - Exterior Luminaire 40,000 lm and more = $100 Per Unit
• Type A, E39 Mogul Base Products: LED 100W/150W Replacement: 3,950 - 15,750 Lumens = $30 Per Unit
• Type A, E39 Mogul Base Products: LED 250W/400W Replacement: 15,751 - 58,050 Lumens = $50 Per Unit

Air Conditioners and Heat Pumps

• Air Source Air Conditioner, split and package units <5.4 tons 16 SEER = $200 Per Ton
• Air Source Air Conditioner, split and package units =5.4 and >11.25 tons 14 SEER = $200 Per Ton
• Air Source Air Conditioner, split and package units =11.25 and <20 tons 13.2 SEER = $200 Per Ton
• Air Source Heat Pumps, split and package units =5.4 tons 16 SEER and 9 HSPF (split), 16 SEER and 8.2 HSPF (single package) = $200 Per Ton
• Air Source Heat Pumps, split and package units =5.4 and >11.25 tons 13 SEER = $200 Per Ton
• Air Source Heat Pumps, split and package units =11.25 and <20 tons 12 SEER = $200 Per Ton

Packaged Terminal Air Conditioners (PTAC)

• New Construction (Standard Size)
  < 3/4 tons - =1 tons = $60 - $100
• Replacements (Non-Standard Size)
  < 3/4 tons - =1 tons = $60 - $100

Packaged Terminal Heat Pumps (PTHP)

• New Construction (Standard Size)
  < 3/4 tons - =1 tons = $60 - $100
• Replacements (Non-Standard Size)
  < 3/4 tons - =1 tons = $60 - $100

Application period

1/1/2023 - 12/31/2023

1. Application period is open

2. Preferred Vendor/Contractor required: Work w/ a Potomac Edison authorized distributor

3. Pre-Approval Required: Yes

4. Pre-Inspection Required: No

5. Post-Audit Required: No

6. Average time from Application to Approval: No application necessary.

7. After approval, funds typically received: Instant rebate is received at time of purchase.

NOTE: Make sure you are in the Potomac Edison (TDU) service territory.

1. No application is required. The Instant Discount is applied at the point of purchase at a participating distributor. Participants may choose to purchase and install equipment themselves or use a contractor, who will work with a participating distributor to obtain the instant discount.

2. Call or Visit a Participating Distributor. Provide the following information:
   > Potomac Edison account number
   > Name and address of the business where the products will be installed
   > Contact name and number
   > Once information is validated, the discount will be automatically applied to the purchase price.
   > Find a distributor

3. Install Equipment. Qualified products and equipment must be installed within 90 days following the purchase. Potomac Edison and/or its program administrators reserve the right to verify the installation of the equipment that was purchased by the participant and rebated by the Instant Discount. View our FAQs

No application is required for this incentive.